DB7002

Professional FM/DAB/DAB+ Monitoring Receiver

Simultaneous FM and DAB/DAB+ monitoring in one advanced product

DB7002 is a revolutionary solution that combines in a single, high-precision tool the most important functionalities of two separate types of product.

To achieve that, our engineers have equipped this model with two independent tuners - one for FM and one for DAB/DAB+, allowing for the device to perform both FM and DAB/DAB+ monitoring in parallel. It measures all of the most significant signal parameters and stores them in log files for future analysis. Its practical design and user-friendly operation also make this product a must-have.

Simultaneous FM and DAB/DAB+ monitoring in one advanced product
  • FM Band 65 - 108 MHz Basic Spectrum Analyzer
  • Up to 100 dBµV direct RF Antenna Input
  • Selectable wide range IF filter bandwidth
  • Built-in input for external MPX analysis
  • Fully DSP-based core
  • Built-in Loudness Analyzer
  • Bright bar graph LED metering of the RF and Audio Levels
  • Wide angle, easy to read OLED display
  • Very Intuitive Navigational Menu
  • Levels measurement with data history
  • Selectable De-emphasis - Off, 50µs and 75µs
  • Built-in Stereo Decoder
  • RDS and RBDS decoder with BER meter
  • Built-in 24 channel FM Data logger
  • Real Time Audio Program Streaming
  • DAB/DAB+ compliant receiver
  • Support for Program Associated Data (PAD)
  • Detailed DAB component information
  • High-end digital tuner
  • Built-in 24 channel DAB/DAB+ Data logger
  • Protected access to the device settings
  • Wide operating voltage range: 100-240V AC
  • Headphone output with front panel level control
  • SNTP for automatic synchronization of the built-in clock
  • Level Adjustable, Balanced Analog Audio Outputs on XLR Connectors
  • Professional AES/EBU Digital audio output
  • LAN port for full TCP/IP remote control and monitoring
  • Adjustable MIN/MAX alarms for RF, Left & Right Audio Levels
  • Alarm dispatch via E-mail, SNMP ver.2C and GPO
  • Built-in WEB and FTP server
  • Easy to use WEB interface
  • Apple and Android devices support
  • Firmware updates will ensure improved operation
  • Accurate front-panel metering for local use
  • Restore Factory Parameters option
  • Easy Installation and Setup

DB7002 is a revolutionary solution that combines in a single, high-precision tool the most important functionalities of two separate types of product. To achieve that, our engineers have equipped this model with two independent tuners - one for FM and one for DAB/DAB+, allowing for the device to perform both FM and DAB/DAB+ monitoring in parallel. It provides detailed and accurate measurement of all of the most important signal parameters and also boasts two loggers with 24 channels apiece for FM and DAB/DAB+. The recorded information is stored in log files on an SD card for easy future analysis and can easily be downloaded via a standard FTP client.

As a product that incorporates DAB/DAB+ monitoring capabilities, DB7002 fully meets the ETSI EN 300 401 DAB standard and offers support for Program Associated Data (PAD), as well as all standard bitrates and VBR, and automatically displays live metadata. It also supports AAC, AAC+, MP3 and RTP, and is fully compatible with the most popular media platforms, including Icecast and Shoutcast.

As an FM monitoring tool, DB7002 also provides powerful signal processing capabilities through sophisticated DSP algorithms and offers a Loudness Meter, which allows for measurements to be shown as defined by ITU BS.1770-4 and EBU R128 recommendations.

To make sure the transmission is not interrupted, there are local alarm options and online notifications via rear-panel alarm GPOs, E-mail and SNMP in case there is audio loss or a change in the signal.

DB7002 can also be managed without effort. It is easy to program via the front-panel menu or remotely through your PC, tablet or smart phone via a standard web browser; iOS and Android devices are also supported. The high-resolution OLED graphical display and the ultra-bright LED bar graph indicators allow for easy reading of the main signal parameters. A user-friendly front panel menu in addition to the set of four soft buttons provides easy navigation and quick access to each function.

DB7002 is definitely a must-have. Its two independent tuners set it apart from any other product, while its effectiveness and precision make it the perfect monitoring tool.

DAB/DAB+ Radio Input
RF frequency range168 - 240 MHz
DAB/DAB+Band III Channels 5A - 13F
Sensitivity18 dBµV
Input connectorBNC 50Ω
In compliance withETSI EN 300 401
Ensemble acquisition Time940 ms
L&R Audio1%, +5.0 to -50.0 dB, 0.1 dB resolution
DAB/DAB+ Radio Metering
Quality indicatorsRSSI, SNR, CNR, FIC Quality, FIB Errors, FFT Offset
PADDLS, MOT
Metadata DisplayedEnsemble Label, Component List & ID, Service List & ID, Dynamic Label, PTY, Sample Rate, Bit Rate, Gain, Mode, Service Mode, Protection Info, Current CU & Address, Country, Language, Time & Date
FM Radio Input
Tuning RangeUser selectable, 87.1-108 MHz (CCIR), 65-74 MHz (OIRT), 76-95 MHz (Japan)
Tuning Step10, 20, 50, 100 kHz
Tuner Sensitivity30 dBµV
Antenna PortsBNC Connector, 50Ω
Antenna Ports Isolation> 40 dB
Dynamic range100 dB
FM Demod
IF Filter Bandwindth15 Increments (27kHz - 157kHz, Auto)
Dynamic range90 dB
Stereo Decoder
Frequency Response (L and R)±0.1 dB, 10 Hz to 15 kHz
SNR (Stereo)60 dB, 50 µs de-emphasis
THD0.15% @ 1kHz, 0.4% from 10 Hz to 15 kHz, 50 µs de-emphasis
Separation50 dB, 50 Hz to 10 kHz, 50 µs de-emphasis
Crosstalk52 dB
RDS Decoder
StandardsEuropean RDS CENELEC; United States RBDS NRSC
Error Correction & CountingYes
AF DecodingYes
CT (Time/Date)Yes
PI, PTY, DI, MSYes
TA/TPYes
RT (Radio Text), RT+Yes
PS (Program Service name)Yes
TMC, ODAYes
Group AnalyzerYes
BER AnalyzerYes
Group Sequence DisplayYes
RDS RAW Data DisplayYes
FM Radio Metering
RF Level±1 dB, 0 to 100 dBµV
Audio±1 dB, +10.0 to -55.0 dB, 0.1 dB resolution
Outputs
Audio (L, R)+12 dBm, 600Ω, balanced XLR Connector
AES3 (L, R)5.0 Vp-p, 110Ω, balanced XLR Connector
Alarms7 Programmable terminals on rear panel, optoisolated
Headphone6,3mm (1/4") Phone Jack
Communication Interfaces
Ethernet 10/100 Base-TRJ45 Connector
Measurement Storage
Storage16GB Build-in Memory Card
Data formatText, CSV
Power
Voltage100-240V / 50-60 Hz
Power Consumption20VA
ConnectorIEC320, Fused and EMI-suppressed
Size and Weight
Dimensions (W;H;D)485 x 44 x 180 mm
Shipping Weight540 x 115 x 300 mm / 2.700 kg
HS Code8527212000